Browse Powerbond
- Hotmelt Glueguns
- Hotmelt Adhesives
- Hotmelt Systems
- Hotmelt Adhesive Roller Coating Systems
- Waterbased Application Systems
- Engineering Adhesives
- Cleaners and Surface Preparation
- Professional, Medical,Craft and Industrial Cutting Knives & Blades
- Bargain Basement

Powerbond Information
- Applications:
- Contact us
- Guides & Comparison Charts
- Anaerobic Comparison Chart
- CA Guide
- Cyanoacrylate Comparison Chart
- Link to the Animal Welfare Trust
- Our Location
- Powerbond Special Announcements
- Send us your feedback

ANAEROBIC COMPARISON CHART
Loctite
|
Powerbond
|
Description
|
222
|
22
|
22 Thread locker is ideal for fastener diameters of 1/4" (6mm) and smaller. Parts can be separated using hand tools.
|
242
|
42
|
42 Thread locker is a general purpose, removable thread locker for fasteners between 1/4" and 3/4" (6 to 20 mm) diameters. Parts can be separated using hand tools.
|
243
|
43
|
43Thread locker is a general purpose, medium strength thread locker with improved oil tolerance. For fasteners between 1/4" and 3/4" (6 to 20 mm) diameters
|
262
|
62
|
62 Thread locker is a permanent thread locker for fasteners up to 3/4" (20 mm) in diameter. Excellent for preventing rust and corrosion in extreme chemical/environmental conditions
|
270
|
70
|
Information to follow
|
272
|
72
|
72Thread locker withstands temperatures to 450°F. Provides a fast cure on most surfaces. Recommended for bolts up to 1 1/2" (36 mm) in diameter. Heat and hand tools are required for disassembly
|
290
|
90
|
90 is medium strength thread locker for pre-assembled bolts up to 1/2" (12 mm). Penetrates threads by capillary action. Secures set screws and other assemblies after settings are completed. Seals welds and porous metal parts
|
601
|
01
|
Information to follow
|
620
|
20
|
20is a high temperature (450°F) Bearing Mount, high viscosity liquid retaining compound. Provides shear strength of over 3,800 psi on steel. Locks and secures metal cylindrical assemblies up to 0.015" diameter clearance. Prevents metal fretting and corrosion
|
638
|
38
|
38 is a maximum strength retaining compound for use where high dynamic force or cyclic loading is expected. Locks cylindrical assemblies up to 0.010" diametric clearance. Fixtures in 5 minutes
|
648
|
48
|
48 is a high strength retaining compound used in applications such as holding gears and sprockets onto gearbox shafts and rotors on electric motor shafts
|
680
|
80
|
80 Retaining Compound is a high strength, medium viscosity, anaerobic adhesive for slip fit assemblies. Provides 4,000 psi shear strength on steel. Fixtures in 10 minutes at room temperature.
|
542
|
542
|
542 is a liquid sealant recommended for sealing fine threads of hydraulic and pneumatic connectors.
|
545
|
45
|
45 Thread Sealant, Hydraulic/Pneumatic Fittings, is a liquid sealant for locking and sealing high pressure, fluid power systems with tapered fittings. Contains no fillers and will not foul valves or fluid filtering systems.
|
554
|
54
|
54 Thread Sealant, Refrigerant Sealant has excellent solvent resistance on threaded fittings and pipes up to 3" in diameter. Recommended for refrigeration systems and service with aggressive chemicals
|
565
|
65
|
65 Thread Sealant is a general purpose instant sealant for tapered and straight/tapered fittings. Controlled strength for ease of disassembly.
|
567
|
67
|
67 Thread Sealant withstands temperatures to 400°F with excellent solvent resistance. Locks and seals tapered pipe threads and fittings, including high pressure applications. Disassembles with hand tools.
|
577
|
77
|
77 is a medium strength, general purpose sealant for use on coarse, threaded components.
|
515
|
15
|
15 Flange Sealant is a flexible, gasket material for use on rigid machined flanges with less than 0.015" gap. Eliminates preformed, pre-cut, paper, rubber and cork gaskets.
|
518
|
18
|
18 Gasket Eliminator® Flange Sealant forms a flexible, solvent-resistant seal that will not tear or decay. Seals to 300°F and fills gaps to 0.50". Can be used on flexible metal assemblies, including aluminium surfaces. Easy disassembly and cleaning.
|